Tag: weather sealing

Episode 243: What Does Weather Sealed Mean?

Spread the love

Greetings, you’re listening to the Liam Photography Podcast, I’m your host Liam Douglas and this is Episode 243. In today’s episode I want to talk about Weather Sealing and what it means to your photography.

What exactly is Weather Sealing, you might remember it was one of them items talked about during my recent two part episode on lens mounts and designations in Episodes 237 and 239.

Weather Sealing is protection of the internal parts of a camera from external influences such as moisture, dust, and humidity. The degree of this weather sealing varies between manufacturers and also within models by each manufacturer.

The protection is provided by both rubber sealing with silicon rings and gaskets as well as design considerations such as interlocking panels and pool resistant exterior pieces. Most obviously buttons such as the shutter release will be designed with either a rubber housing beneath them, or a gasket to prevent the entry of the elements. Sealing is not provided by a single piece of hardware. I have often seen values such as 60-70 silicon rings being used in a typical DSLR body for weather sealing, and 30-40 being used in a battery grip for example.

Weather sealing in all but the most high end professional serious cameras is a relatively new occurrence in the consumer market. One can now commonly find weather sealing even in cameras costing under $1,000 USD if you look for the right models.

Commonly weather sealing considerations are limited to moisture from weather such as rain, snow, humidity, and also dust and sand. I would argue that weather sealing does not end at that, but also includes anything that protects the camera from usage and keeps it working as designed. With this in mind I would also consider features such as magnesium-alloy chassis design, shock protection, shielding against electromagnetic interference, stronger shutter mechanisms, sensor dust resistance, carbon-fiber lip on lens ends, and even special fluorine coatings on the low-pass filters as all being components of weather sealing.

Camera Bodies

Weather sealing is added during manufacturing, either as additional components in the design, or as part of the design of the camera. The best way to understand exactly what you get with weather sealing is to look at a diagram example from a camera, showing a cross section of the body with the added weather sealing components: 

The seals and gaskets highlighted in this image of a Canon 7D is what is considered the weather sealing. Weather sealing can be described as John Carlson from Pentax described at thephoblographer.com:

“The seals that involve moving parts are constructed from a more elastic material than that used for fixed parts.” says Carlson. “By using a different material we can ensure it operates smoothly while maintaining its seal from dust and moisture.”

Lenses

 

He hinted at another good point which is how lenses play into the weather sealing equation. A camera body can be weather sealed, but if you add in a lens that is not, that in essence will compromise the integrity of the body weather sealing. Water could enter through the mount in these cases, and the gaskets and rings in the body design will not prevent this. With this in mind, to complete the weather sealing package you will want to look for a lens that is weather sealed as well. Some lenses(not all) require the addition of a front filter element to complete the weather sealing. Keep this in mind when purchasing weather sealed lenses and read the specifications to ensure you are equipping yourself properly.

Image of Pentax 25mm f4 via thephoblographer.com

A good definition from Canon can be found at thephoblographer.com:

Chuck Westfall, Advisor for Technical Information at Canon USA states that, 

“Canon EF lenses that have been enhanced with countermeasures for dust and water resistance are typically equipped with rubber gaskets and seals at key points.”

Similarly a definition from Pentax at thephoblographer.com:

John Carlson, Sr. Marketing Manager: “Our weather sealed lenses contain a silicon rubber material which is inserted in between each externally exposed part to ensure it is properly sealed against moisture and dust.”

I found a particularly interesting note about weather sealing of lenses from Roger Cicala, Owner of LensRentals.com:

“I’ve never been very impressed by anyone’s weather sealing. A rubber gasket at the lens mount, waterproof tape over the holes under the rubber, that’s about it. I can see that it would tend to keep water droplets from working their way inside the lens but I can’t imagine them surviving a steady rain – watersealed or not. I haven’t noted any difference in Canon, Nikon, or Olympus high end lenses.”

Flash Units

Weather sealing doesn’t end at camera bodies and lenses. Even external flash units can be weather sealed. The Canon Speedlite 600EX-RT for example has quite extensive weather sealing. It has a level of weather sealing that matches the moisture- and dust-resistance of the EOS-1D X camera body. 

An interesting development as of recently is that some pop up flash units on DSLR’s are also now considered weather sealed. Historically this has been a failure point of weather sealing, but some how Pentax has been now offering DSLR’s that are weather sealed and also have pop up flashes.

Caution

Weather sealing does not mean weather proof. It is uncommon for manufacturers to guarantee any performance based on the sealing. If a camera notes that it is weather sealed, you can be more confident using that equipment in inclement weather such as light rain or snow. Some models exhibit fantastic sealing and can be submerged in water for a time and still perform without issues. Other weather sealed models can fail even after a light spray of mist. I would advise caution unless you are certain that the sealing is sufficient in your conditions, and even then a bit of common sense can go a long way.

It was mentioned above, but I will mention it again here – if you use a non weather sealed lenses with a weather sealed body, you are risking a failure. The inverse is also true, using a sealed lens on a non sealed body can be troublesome. It is recommended to use a fully sealed kit including body and lenses when the conditions deem weather sealing necessary.

Connecting external adapters and or cables can also compromise the sealing. The connection of a USB, HDMI, PC, or other connector can force the opening of a protective cover that would then expose the camera body to external forces. Another issue can be battery grips, that typically require the opening of the battery door to insert the grip. Not all battery grips are weather sealed, and even those that are can negatively impact the weather sealing performance of the camera body.

Cleaning and Care

Another thing to keep in mind if you are shooting in bad weather is that you need to properly clean and dry your gear afterwards to prevent any future issues. A lot of photographers love to shoot on the beach, for sunrise and sunset photos or to shoot water sports like skiing or jet skiing or parasailing. If you are close to the water, there is always the possibility of water spray hitting your gear and salt water can be brutal on your equipment. There is also the probability that sand will get into things as well, especially if you are using a tripod. Once you get back home you need to clean and dry ALL of your gear. To remove any moisture I recommend using Silica Gel Desiccant packs to draw ALL the moisture out of your gear. Use gallon sized Ziplock bags, put your camera body in one and your lens in another with a Desiccant and zip it shut and allow several hours or over night. 

For your tripod, you are going to want to take the legs completely apart to clean them properly because once sand gets into the section points, it’s only a matter of time before they get harder and harder to use and then don’t work at all. I know tearing your tripod legs apart can be daunting, but if you reach out to the manufacturer and search on Youtube you can probably find a video on how to disassemble and reassemble your tripod clean for proper cleaning and maintenance.

Conclusion

So in conclusion, if you are asking if you should buy weather sealed lenses and camera bodies, my two cents are if you can afford it, absolutely. The camera bodies and lenses with weather sealing will cost more, but offer some protection to your investment. Not all of my lenses have weather sealing, but all my camera bodies do and I do love to shoot in the rain, but I avoid shooting in a massive downpour unless I have a water proof bag over my camera and lens combo or I use an umbrella. Now I know you are thinking, “An umbrella, how am I supposed to hold that and my camera gear?” Well if you check in the show notes, you’ll find a link to an umbrella hat that I use, which will allow you to keep your hands free when shooting in the rain. The water proof bag link is to a model that covers your camera body and lens and has sleeves so you can work your gear more easily.

Just remember, weather sealing is nice to have, but don’t rely totally on it to protect your gear in bad weather. Use proper wet weather accessories to give yourself more peace of mind and clean and dry EVERYTHING when you get back home, so you won’t have to send your camera or lenses in for repairs. Remember the old Ben Franklin quote, “An ounce of prevention is worth a pound of cure.”

Also be sure to join the Liam Photography Podcast Facebook Group https://www.facebook.com/groups/liamphotographypodcast/ You can reach the show by call or text @ 470-294-8191 to leave a comment or request a topic or guest for the show. Additionally you can email the show @ liam@liamphotographypodcast.com and find the show notes at http://www.liamphotographypodcast.com.

You can find my work @ https://www.liamphotography.net on and follow me on Instagram, Facebook and Twitter @liamphotoatl. If you like abandoned buildings and history, you can find my project @ http://www.forgottenpiecesofgeorgia.com. and http://www.forgottenpiecesofpennsylvania.com.

Please also stop by my Youtube channels Liam Photography

Forgotten Pieces of Georgia Project

Forgotten Pieces of Pennsylvania Project

RSS
Follow by Email
Twitter
Visit Us
Follow Me
Tweet
Youtube
Youtube
Pinterest
Pinterest
Pinterest
Instagram
Flickr
Tumblr
LinkedIn
Share
Fb messenger